Broken Hose Bib Replacement at a Colleyville Business

A leaking outdoor faucet might seem like a minor annoyance, but it adds up fast. Water running where it shouldn't, corrosion building up around the fitting, and a makeshift tape job holding things together - that's exactly what we found on this one. The old hose bib was wrapped in layers of tape just trying to keep things from getting worse. That's a temporary fix on a problem that needed a permanent one.

Here's the thing about hose bibs - when they fail, they usually don't fail clean. This one had corroded badly at the threads, and the internal components were shot. You could see the green oxidation and pitting on the brass fittings we pulled out. No amount of tape was going to solve that. The pipe connection behind the wall had also taken a beating, which is pretty common when a leak goes unaddressed for a while.

We got into the wall, dealt with the pipe connection properly, and installed a solid new hose bib - sealed up tight against the brick and working exactly the way it should. Clean install, no more dripping, no more band-aid fixes. That's what hose bib replacement is supposed to look like.

Outdoor plumbing takes a beating. Between temperature swings, physical wear, and age, hose bibs are one of the most commonly neglected fixtures on a commercial property. They're easy to ignore until they're not. A small drip can waste a surprising amount of water over time, and if the leak is working its way back through the wall, the damage can spread fast.

If you've got a hose bib that's dripping, corroded, or just held together with tape and hope, that's worth getting handled sooner rather than later. We do hose bib replacements and broken pipe repairs for both commercial and residential properties in the Colleyville area.